Product Description
The concept of gear pump is very simple, its most basic form is two gears of the same size in a closely matched housing meshing rotation, the interior of the housing similar to the "8" shape, two gears installed inside, the outer diameter of the gear and both sides of the housing closely matched. The material from the extruder enters the middle of the two gears at the suction inlet and fills this space, moving along the housing with the rotation of the teeth, and finally discharging when the two teeth mesh.
The gear pump is driven by an independent motor, which effectively blocks upstream pressure pulsations and flow fluctuations. The pressure pulsation at the outlet of the gear pump can be controlled within 1%. The use of a gear pump in the extrusion line can increase the flow output speed and reduce the shear and residence time of the material in the extruder.External gear pump is the most widely used gear pump, the general gear pump usually refers to the external gear pump. Its structure is shown in Figure 5-14, which mainly consists of driving gear, driven gear, pump body, pump cover and safety valve. The seal space composed of the pump body, pump cover and gear is the workshop of the gear pump. The shafts of the two gears are respectively installed in the bearing holes on the two pump covers, and the driving gear shaft extends out of the pump body and is driven by the motor to rotate. External gear pump has simple structure, light weight, low cost, reliable operation and wide application range.
| Brand | Rexroth |
| Fuel | DC power, Battery |
| Temperature Range | 0-80 degrees Celsius |
| Lead Time | in stock |
| Structure | Gear pump |
| Flow Rate | 100 L/min |
| Gear | oil pump |
| Colour | silvery |
| Power | Electric |
| Heating Method | thermal oil or electric heating rod |
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.
Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.
Product Tags:
|
|
Rexroth Gear Pump AZPF-12-011RCB20MB Silvery Colour For Extrusion Line Increase Output Images
|
